The paper “High-Frequency Capacitor Performance of Novel Embedded Electrode Design” was presented by Mark Simpson, Quantic Eulex, Monterey Park, CA, USA, at the 5th PCNS Passive Components Networking Symposium 9-12th September 2025, Seville, Spain as paper No. 3.4. This Read the original post at High-Frequency Ceramic Capacitor Performance of Novel Embedded Electrode Design
The paper “Capacitor Degradation and Failure Mechanisms: Exploring Different Causes Across Technologies” was presented by Frank Puhane, Würth Elektronik eiSos GmbH & Co.KG, Waldenburg, Germany at the 5th PCNS Passive Components Networking Symposium Read the original post at Different Causes of Capacitor Degradation and Failure Mechanisms
The paper “New Construction And Packaging Process For Highest Voltage Aluminium Polymer Electrolytic Capacitor” was presented by Tim Kruse, Department of Mechanical and Electrical Engineering, University of Southern Denmark, Sønderborg, Denmark Read the original post at New Construction For Highest Voltage Aluminium Polymer Capacitor
Bourns releases automotive grade, AEC-Q200 compliant SDE0403AT SMD power inductor series with higher current density, high saturation current and low-profile footprint supports improved power efficiency and increases design flexibility. Bourns, Read the original post at Bourns Releases Automotive 150C SMD Power Inductors with High Saturation Current
This article based on Modelithics blog article “taking advantage of discrete optimization” explains hot to optimize discrete components in RF circuit design using Keysight ADS and Modelithics Microwave Global Models Read the original post at Discrete Components Selection Optimization with Modelithics and Keysight ADS
